產品詳情
收藏
|
真空高溫感應燒結裝備
編號: JTZK-ZS
技術方案簡介: 真空感應高溫燒結爐是在真空或氣體狀態下工作,利用中頻電源感應爐內發熱體(石墨或鎢),使發熱體產生感應電流,進而產生高溫,通過輻射傳導到工件上,使工件被加熱到工藝要求的溫度。  本設備主要用于高溫合金材料的燒結,醫用人造骨骼燒結,也可作碳等高溫材料的高溫處理。特別適用于鎢、鉬制品的燒結。
產品詳情
產品評論(0)

真空高溫感應燒結裝備


設備用途及原理

  真空感應高溫燒結爐是在真空或氣體狀態下工作,利用中頻電源感應爐內發熱體(石墨或鎢),使發熱體產生感應電流,進而產生高溫,通過輻射傳導到工件上,使工件被加熱到工藝要求的溫度。

   本設備主要用于高溫合金材料的燒結,醫用人造骨骼燒結,也可作碳等高溫材料的高溫處理。特別適用于鎢、鉬制品的燒結。


Application and Principles

Vacuum induction high-temperature sintering furnace uses medium-frequency power supply induction furnace inner heating elements (graphite or tungsten), under vacuum or gas environment, to generate induced current, and furthermore generate high temperature conducted to working elements by radiation, heating them to process required temperature.

  This equipment is primarily adopted to sintering of high-temperature alloy materials, sintering of medical artificial bones, and also as high-temperature treatment on high-temperature materials like carbon. Especially, it is suitable for the sintering of tungsten and molybdenum products.


設備主要技術參數Principle Technical Parameters

  以下是設備產品技術參數,部分數據會隨著產品創新改進,最新數據請聯系我們:

Product technical parameters of equipment are presented as below, and partial of these data will be updated as the product innovation, please contact us if any latest data: 以上為標準配置,可根據客戶要求進行調整。

It is standard configuration above, and can be adjusted according to the demand from customers.

湖南久泰冶金科技有限公司歡迎您!
全站搜索