產品詳情
收藏
|
高真空大型真空燒結裝備
編號: JTZK-LS
技術方案簡介: 久泰科技高真空大型真空燒結裝備主要用作真空或載氣狀態下脫脂(蠟),燒結等。特別適應于鐵鋁,鈦鋁金屬間化合物過濾材料燒結。也適用于不銹鋼基、硬質合金、高溫合金、高比重合金、金屬陶瓷、磁性材料、碳化物、硼化物、氧化物制品燒結。
產品詳情
產品評論(0)

高真空大型真空燒結裝備


設備用途及原理

  高真空大型真空燒結裝備主要用作真空或載氣狀態下脫脂(蠟),燒結等。特別適應于鐵鋁,鈦鋁金屬間化合物過濾材料燒結。也適用于不銹鋼基、硬質合金、高溫合金、高比重合金、金屬陶瓷、磁性材料、碳化物、硼化物、氧化物制品燒結。

      結構簡介

      本系列真空燒結爐采用立式水冷套結構,底開門,自動升降??蛻艨筛鶕t溫高低和工藝要求,可選用鉬片或石墨作發熱體,可采用碳纖維作隔熱屏,亦可采用鉬片+不銹鋼組成的復合隔熱屏。發熱體可分成多區布置。各區獨立控溫,可編程PID調節,精確控溫。配置專用密封爐膛和多級水冷蝶片式捕脂器,實現定向氣流脫脂,爐內無藏脂死角,脫脂更趨徹底。可配備爐內或爐外循環冷卻裝置,加速爐內物料冷卻,縮短工作周期,提高生產效率。


Application and Principles

High-vacuum large vacuum sintering equipment produced by is primarily applied to degreasing (dewaxing) and sintering under vacuum or gas carried circumstances. Especially, it is used for sintering of FeAl compound and TiAl compound filtering materials. Also, this equipment is utilized to sintering of stainless-steel bases, cemented carbide, high-proportion alloy, metal ceramics, magnetic material, carbides, boride, and oxides.

 Structure abstract

 This series of vacuum sintering furnace adopts vertical water cooling unit pattern, bottom door, and auto-elevating. Depending on the demand for furnace temperature and process requirement, clients can choose molybdenum strip or graphite as heating element, adopt carbon fiber as thermal insulation screen, and also can utilize composite thermal insulation screen made of molybdenum strip and stainless steel.

 Heating elements can be distributed among multi districts, and each district controls temperature independently, programs PID regulation, and precisely control temperature.

 It is equipped with particular sealed furnace pipe and multi-stage water cooling disk styled fat trapper, achieving degreasing by directional gas flow, and no fat-hidden dead corners inside furnace, allowing more completed degreasing.

 It can be equipped with furnace inside or outside circulation cooling device, accelerating the chilling of material inside furnace, shortening working period, and improving production efficiency.


設備主要技術參數Principle Technical Parameters

  以下是設備產品技術參數,部分數據會隨著產品創新改進,最新數據請聯系我們:

Product technical parameters of equipment are presented as below, and partial of these data will be updated as the product innovation, please contact us if any latest data:

以上為標準配置,可根據客戶要求進行調整。

It is standard configuration above, and can be adjusted according to the demand from customers

湖南久泰冶金科技有限公司歡迎您!
全站搜索